• 0
    • Add to wishlist
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    The Geosub Pump & Controller
    GeoTech

    Geosub Pump & Controller

    Daily Rate $145

    Weekly Rate $560

    Monthly Rate $1848

    This stainless steel sampling pump is the most versatile single stage DC pump in the industry. Designed with all stainless steel components, the Geosub 2 allows you to sample with confidence even in the harshest well conditions. The Geosub 2 operates with the Geotech Geosub 2 Controller.

    Description


    Geosub Pump & Controller

    The Geosub 2 Controller is designed specifically for use with Geotech's Geosub 2 Pump. It provides a safe conditioned variable DC output power from an AC power source. Built-in sensing gives the operator accurate and precise control over the pump during sampling events.


    An average 1000 Watt gasoline powered generator with 1 gallon of gasoline can operate the SS Geosub Controller and Geotech's sampling pump at full power for up to 18 hours continuously (generally much longer runtimes can be expected as the controller is used to reduce water flow for low flow sampling).


    Features

    Geosub 2 Pump

    • Most versatile pump in the industry, sample from depths to 200 ft. (61m)

    • Low flow sampling rates to 10 mL/min

    • User enabled dry-run protection

    • Easy to decontaminate

    • Optional Drop Tube Assembly for greater depth

    • Field replaceable motor lead kits available

    • Portable reel systems or dedicated well systems available to meet your needs (optional)


    Geosub 2 Controller

    • Converts AC Voltage to variable up to 300 watt DC voltage output

    • Short circuit protection for your safety

    • Heavy duty rated power cable for years of service

    • 2-line x 16-character wide temperature range alpha-numeric digital display

    • Push button Up/Down control

    • Internal processor saves individual well parameters

    • Optional DC to AC Inverter can be connected to a vehicle battery


    Specifications

    Pump

    Electric
    Full Load Rating
    2/3HP
    Maximum Amp Draw
    10 amps DC
    Overload
    Incorportated into Geosub 2 Controller
    Discharge Port Connection
    1/4" female NPT (includes 3/8" barb)
    Operating Conditions
    Minimum Ambient Fluid Temperature
    34°F (1°C)
    Maximum Ambient Fluid Temperature
    176°F (80°C)
    Wetted Parts
    316 Stainless steel, PEEK, HDPE
    Dimensions & Weight (Pump & Motor)
    Dimensions of Pump
    13.2" L x 1.75" OD (34cm L x 4.5cm OD)
    Net Weight of Pump w/o Lead
    4 lbs. (1.8 kg)


    Cable

    Material
    Two 12 gauge conductors with HDPE jacket, and integrated safety cable
    Weight with Geo Reel & Safety Cable
    100' (30.5 m) of 12 AWG & Safety Cable
    18.3 lbs. (8.3 kg)
    150' (45 m) of 12 AWG & Safety Cable
    21.6 lbs. (9.8 kg)
    200' (61 m) of 12 AWG & Safety Cable
    24.9 lbs. (11.3 kg)


    Controller

    Input Power Range
    100-130 Volts AC
    50/60 HZ 310 Watts
    4.2 amps nominal full load 115 Volts AC
    200-250 Volts AC
    50/60 HZ 310 Watts
    2.1 amps nominal full load 230 Volts AC
    Output Power
    Variable 0-46V DC @ <300 Watts
    Output Power @ Maximum Voltage
    10 amps maximum
    Operating Temperature
    -20°F to 100°F (-29°C to 38°C) ambient air temp.
    Humidity
    Up to 90% humidity
    Weight of Unit
    16.45 lbs. (7.46 kg)
    Size of Unit
    16" L x 13" W x 7" H (41cm L x 33cm W x 18cm H)
    Input Protection
    5A CB

    Resources


    Geosub Pump & Controller Manual


    Geosub Pump & Controller DataSheet


    Geosub Pump & Controller Instructions

    Media

    GEOSUB Submersible

    Contact Us

    Policies

    1+ (210) 566 1857

    108 Commercial Pl Ste 200, Schertz, TX 78154

    © 2024 All rights Reserved

    Facebook-f Twitter Instagram