QED

Pro Bladder Pump Kit

Daily Rate $40

Weekly Rate $125

Monthly Rate $395

The Sample Pro Portable MicroPurge Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites where groundwater samples are collected from many monitoring wells with the same pump. The Sample Pro Pump is easy to disassemble, without any tools, and simple to clean to eliminate any potential cross-contamination. That includes the exclusive Sample Pro disposable bladder, which snaps in and out without any clamps, so they can be discarded after each well is sampled.

Description


QED Sample Pro Bladder Pump Kit

Features

    • Exclusive Sample Pro disposable bladder is quick & easy to replace in the field, for fast cleaning.

    • Rugged, reliable, complete system designed for easy use in the field.

    • Quick 1/4 turn disassembly with no tools means simple, fast and complete field cleaning. Disposable bladders and push-in tubing replace in seconds, speeding you on to the next well.




  • Solid stainless steel construction is truly durable, with no motors, bearings, or impellers to go bad. Even if the pump fills with silt, it can be put into action again with a quick, simple cleaning. Output pressure is strong and controllable

  • Direct push technology and low flow sampling reduce the costs of well installation, sampling and purge water handling. This is the only sampling pump that minimizes turbidity and silting caused by the well surging of other devices such as bailers and jerk samplers, and collects quality samples from small diameter wells at significant savings.


Specifications

Specifications

Pump Model
Sample Pro 1-3/4 in.
Outside Diameter
1.75 in. (47 mm)
Length
With Push-in Fittings
14.75 in. (375 mm)
With Compression Fittings
16.5 in. (419 mm)
From Bottom of pump to centerline of inlet
12.1 in. (307 mm)
Weight
4.25 lbs. (1.93 Kg)
Maximum Lift
250 ft. (61 m)
Volume Per Stroke
3.34 oz (100 mL)


Materials of Construction
Body of Construction
316 Stainless Steel
Inlet, Discharge & Head
303 Stainless Steel
Bladder
Polyethylene
O-Rings
Viton
Fitting Type
Push-in Fitting w/ 316 Stainless Steel Grab Plate
Air Type
1/4 in. (6.4 mm) O.D.
Fluid Discharge
1/4 in. (6.4 mm) or 3/8 in. (9.5 mm) O.D.
Pump Part Numbers
MP-SP-4P (1/4 in. discharge, push-in fittings)
MP-SP-4C (1/4 in. discharge, compression fittings)
MP-SP-6P (3/8 in. discharge, push-in fittings)
MP-SP-6C (3/8 in. discharge, compression fittings)

Media

QED Micropurge Kit